DC9V x 8 out power supply with digital voltage meter. Employs a linear system that can supply noiseless power. It’s even smaller and lighter, making it the perfect power supply for compact effect boards.
Equipped with a digital voltage meter to the 6th generation “VI” The
CAJ AC/DC Station, which has continued to evolve since it was developed as a custom power supply for rack systems in the 1990s, has achieved further miniaturization in addition to new functions. and released as AC/DC Station VI.
Equipped with a digital voltage meter that constantly monitors the supply voltage, downsizing is achieved with 8 OUTPUT specifications. Furthermore, by setting the output voltage to about 9.65V, which is close to the initial value of a new 9V battery, the potential of the effector is maximized.

Employs an extremely noiseless “linear system” The linear
power supply, which converts the AC (alternating current) power generated by the power transformer into DC (direct current), is highly efficient compared to the switching system, which claims to be compact and lightweight. It is still the mainstream in the world of high-end audio because it provides a stable clean power supply without pulse noise.
The linear method, which boasts excellent noise immunity, is consistently used in AC/DC Stations.

What is the current consumption required for the effect board system?
How much current consumption is required to drive the

effector ? : 20mA to 25mA Digital delay/reverb: 50mA to 60mA MIDI compatible Digital EQ: 75mA MIDI compatible Multi-function digital effector with memory function: 75mA to 200mA (reference value)

For example, when power is supplied to an effect board incorporating analog overdrive, distortion, digital chorus, digital delay, digital reverb, and digital EQ, the total current consumption is about 300mA. AC/DC Station VI, which can supply power up to 450mA, can supply power with sufficient margin.
(*Please note that digital effectors may generate noise in effectors connected to the same power line.)

SPECIFICATIONS
*AC/DC Station IV, V, and VI adapters are also compatible.

Size: AC/DC Station VI: 167(w) x 33(d) x 23.3(h) mm
AC adapter: 52(w) x 42(d) x 64(h) mm / Cable length 1.8m (including protrusions)
Weight: AC/DC Station VI: 235g / AC adapter: 260g
Maximum current consumption: 450mA
Connection terminal: AC12V INPUT x 1 Center pin 1.7 mm
DC9V OUTPUT x 8 Center pin 2.1mm (-) polarity
Accessories: AC adapter x 1 / CAJ DC Cable 2.1×8